Profile

Nekad jaya engineering is a company design, build and refurbish all kinds of pools from residential to commercial buildings. We also offer our commitment which is to provide a safe and clean environment with a friendly and dependable staff at affordable prices.

Surface skimmers are fixtures in the wall of the pool that draw a thin film of water over a self-adjusting floating weir. A surface skimming system is installed on all swimming pools and spas which is designed and constructed to skim the pool or spas surface.

Overflow system is a channel or an open trench that runs around the perimeter of a pool. It is normally extended completely around the pool to skim the water surface. It is also known as an overflow gutter. Water is allowed to overflow and then recirculated through the pump and the filter to go back into the pool.

An infinity pool (also named negative edge or vanishing edge pool) is a swimming pool which produces a visual effect of water extending to the horizon, vanishing, or extending to infinity. In reality the far edge of the pool (with the view in the background)

Nekad jaya engineering is a company design, build and refurbish all kinds of pools from residential to commercial buildings. We also offer our commitment which is to provide a safe and clean environment with a friendly and dependable staff at affordable prices.

An airlock is simpy air that is stuck inside the pump. The pump is turning but instead of pushing out water it's moving air inside itself.The following are some steps you can take yourself to remove the air lock.

Note: It's important NOT to run the spa if you have an airlock. If you turn on the spa and you hear the pumps running but no water comes out, turn the pump off immediately.  There is a chance that you might run the pump "dry" and actually break it.If you suspect an "airlock" (you can hear the pump running but see not water circulating), follow the steps below.

Swimming pools and spa's can be hazardous places if they are not well managed. The following details highlight some of the hazards and risks that might exist at your swimming pool or spa pool. They are by no means exhaustive and will vary depending on your own particular environment.

Bacteria
Pathogenic bacteria and Protozoa if allowed to grow and multiply in swimming pools and spa pools can lead to disease.These include:
• Cryptosporidia
• Giardia
• Legionella
• Pseudamonas, and
• E coli

1.Turn the circuit breaker (main power switch) off for about 10 seconds2.Some spa models have a "bleeder valve" located near the filter cartridge. Locate and open that3. Turn the circuit breaker back on4. Let air and water come out of the bleeder valves, until it's only water = air lock is gone.

Chemicals
Handling chemicals can cause burns and skin irritation and certain chemicals when mixed can lead to dangerous gases being produced, which could cause asphyxiation.

1. Turn the circuit breaker (main power switch) off for about 10 seconds.
2  Turn it back on again,
3. Turn on the jets (If you have more than one jet button, turn them on    
    one at a time) to verify that water is being pushed.